360mm BANDSAW STOCK No.36761 PART No.BS355A• INSTRUCTIONS •IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THESAFE AND EFFECTIVE U
- 9 -OPERATION & USECHANGING SPEEDS1. Turn the main power switch off anddisconnect from the power supply.2. Remove the front cover.3. Refer to Fig
- 10 -OPERATION & USECHANGING BLADES1. Turn the main power switch off anddisconnect from the power supply.2. Remove front cover.3. Remove the uppe
- 11 -OPERATION & USEMITRE GUIDEMost cross cut work, especially with smallpieces of material are more easily controlledwith the aid of the mitre g
OPERATION & USE- 12 -Remove the saw blade as explained inCHANGING BLADES (page11).Remove the sanding disc guard from thefront cover. Mount the sup
- 13 -TIPS ON USING YOUR BANDSAWWORKTABLEThe worktable is a 400x400mmaluminium die-casting. It supports thematerial being cut and is grooved toaccept
TIPS ON USING YOUR BANDSAW- 14 -For all cutting operations the upperblade guard should be adjusted to justclear the work being cut (approx. 3mmor 1⁄8&
- 15 -MAINTENANCECHANGING TYRESEventually the rubber tyres on the bandsaw wheels will wear due to the constant contact ofthe sharp teeth of the blade.
- 16 -NOTES
NOTES- 17 -
NOTES- 18 -
360mmBANDSAW STOCK No.36761 PART No.BS355ACONTENTS:Page No.Contents/Declaration ...
DRAPER TOOLS LIMITED,Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K.Helpline: (023) 8049 4344.Sales Desk: (023) 8049 4333.General
- 2 -The Draper Tools policy of continuous improvement determines the right to change specificationwithout notice.Part No. ...
- 3 -CONNECTING YOUR MACHINE TO THE POWER SUPPLY: (230V)To eliminate the possibility of an electric shock your machine has been fitted with a BSapprov
- 4 -GENERAL SAFETY INSTRUCTIONSFOR POWER TOOLS1. KNOW YOUR POWER TOOLRead and understand the owner's manual and labelsaffixed to the tool. Lear
ADDITIONAL SAFETY RULES FORBANDSAWS/DISCS AND STRIP SANDERS- 5 -1. Lower the blade guard to withinapproximately 3mm above thematerial being cut.2. Alw
UNPACKING AND CHECKING CONTENTS- 6 -WARNINGFor your own safety, do not connect the plug to the power supply until all the assemblysteps are completed
- 7 -GETTING TO KNOW YOUR BANDSAW1. No Volt switch 12. Blade guard2. Drive wheel & sanding disc 13. Tracking wheel3. Sanding guard (not shown) 14.
- 8 -ASSEMBLYYour bandsaw is supplied assembled exceptfor the work and sanding table. To assemblethe worktable to the bandsaw:1. Remove the table lock
Comments to this Manuals