Draper 300278 Datasheet Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Serial and Network Controls for Projection Screens and Projector Lifts by Draper Page 2 of 2
www.draperinc.com
(765) 987-799
9
* Wiring diagrams also ship with individual controls
Wiring Diagrams*
Serial (RS232) Control using the MC1
See separate Serial Communication-RS232 Instruction sheet for instructions on enabling RS232 with the MC1.
RS232 Data FROM Control System
RS232 Data TO Control System
Signal Ground & Manual Switch Common
Manual Switch Down
Manual Switch Up
White-Common to screen & 110-120V AC Neutral
Red-to Screen (directional)
Brown-to Screen (directional)
Black-Hot to 110-120V AC
Green/Yellow-Ground
Fuse
Program LED
Eye Port for IR Eye. For RF Receiver or LED
Wall Switch, a Splitter and a Power Supply
is required. Plug RF Receiver or LED Wall
Switch and Power Supply into splitter, then
run cable from Splitter to MC1 Eye Port.
Low Voltage Wiring by others
AC Wiring by electrician
MC1
Location of key
operated on-off
switch if furnished
To 110-120V Line
White (Common)
Red (Up)
Black (Down)
Green (Ground)
Internal Screen Wiring
PROJECT:
SCREEN MODEL:
DATE: REVISED:
Network (IP) Control using the MC1
White-Common
Red-to Screen (directional)
Brown-to Screen (directional)
Black-Hot to 110-120V AC
Green/Yellow-Ground
Fuse
Program LED
Low Voltage Wiring by others
AC Wiring by electrician
MC1
To Ethernet
LS100
Power
Supply
192.168.1.101
Subnet = 255.255.255.0
Gateway = 192.168.1.1
Yellow = Rx (Receive data from control system)
Green = Tx (Transmit data to control system)
Black = Gnd (Signal Ground)
Red = Unused
Electrically
Straight
Data Cable
MJA4
Adapter
RS232
Adapter
White-Common
Red-to Screen (directional)
Brown-to Screen (directional)
Black-Hot to 110-120V AC
Green/Yellow-Ground
Fuse
Program LED
Low Voltage Wiring by others
AC Wiring by electrician
MC1
Yellow = Rx (Receive data from control system)
Green = Tx (Transmit data to control system)
Black = Gnd (Signal Ground)
Red = Unused
To Ethernet
LS100
Power
Supply
192.168.1.101
Subnet = 255.255.255.0
Gateway = 192.168.1.1
RS232
Adapter
Data
Cable
Or
Page view 1
1 2

Comments to this Manuals

No comments